i am in search for a crankshaft for a 1.3l out of an 88 zuk. would like to get one that is in great shape but can deal with it if it needs to be turned.

Which one?

i need a crankshaft not a driveshaft

ha  haa h aha haha ha 

gotcha  there   !!

I have a 1.3L out of an 88.5 Zuk that was still running when it was pulled.  I believe that it had a dead cylinder, but the crankshaft sould be in decent condition for one with 90+K on it.  The engine will not have the valve cover, oil pan, alternator, or timing chain cover.  The starter, intake and carb will come with it.

Make me a reasonable offer if you want it. 

Is seventy five dollars okay?  Building on a tight budget! Wedding/kid on the way you know!

would like to see bearing surface if possible.

You have a deal. 

I will be out of town this weekend, but I should be able to get it some time next week.  I am keeping it out at a friend place about 20min west of Wichita.  The valve cover, oil pan, and timing chain cover are still on it, so I will need to remove those parts before I sell it.  A friend had asked me to keep those parts for him.  I just left them on the keep the engine sealed.  If you want, I can get the engine over to a friends shop and get it ready for you pick up, and you can  look at the crankshaft before you get the engine.

I will pm you my #