At the end of July/Aug I will be completely parting out my 90 tin top and selling all the parts I can on ebay.  Then in Oct or so, it goes to the yard.

Why:  I bought a 04 and am going to make it a DD and off road vehicle.

Why ebay:  I am no good at the ‘lets haggle’ thing.  Plus I don’t want to get screwed and I don’t want anyone else to either.  It’s just easier to keep track of this way.  I will make exceptions for small stuff.

Why July/Aug:  It always seems that every time someone lists a ‘for sale’ item on the forums that I want, I don’t have the cash.  This gives people time to get a few bucks together and it gives me time to get stuff off the car.

About the motor:  I plan on keeping it as a spare for my G/Fs 93.  But, if you want to make a good offer and are willing to meet in Iowa and pay my gas, I will sell it.  But, without the header, alt, coil, starter or el. Fan.

About the Calmini lift:  It has new polly bushings on the front and a new hiem joint, but the hiem joint has been modified to work with the rolled rear mod.  Seems like new ones are about $40.  (keep in mind that this will probably have to be shipped in two boxes and will be a bit $$ for shipping)

About the 5.83 gears, wheel spacers and el fan:  I am trying to figure out how to get these into my 04.  If I can’t, then they go too.

About trading:  I am looking for an ARB style snorkel (passenger side), and parts to get my gears to fit in my 04.

If there is something specific, i.e. air vent, window latch, break stuff, something small and easy to get off, whatever you want:  PM me (be specific) with an reasonable offer (+shipping).

Please know - I will only accept Pay Pal or money order,  in advance.

Anyway this is just a heads up, hope this will help some people get some stuff that they want/need.  I am only posting this on Zukiworld.com, Zuwharrie.com and KCZuks.com.  my ebay ID is elvarian78 and I have 100% feedback and only ever charge actual shipping costs (no handling crap).  I will post here in July/Aug when I put stuff up that I think someone might want.  Thanks.

Exterior
front and rear custom tube bumpers(made for 2.5" to 3" body lift),  Calmini steering stabilizer, strengthened control arm pivot, 3” Calmini sus lift, 3” custom body lift, custom ½ doors

Interior
Dodge neon seats welded to Tracker rails, 2” extended shifters, Uniden pro 510 CB w/mic and magnetic antenna, one rear half seat from a JX

Engine
Fully rebuilt engine with under 10k, 3 angle grind on valves, ported and ground intake, Calmini high pro cam, all new sensors and sending units, new O2 sensor, new oil pump, new water pump, new timing belt, Calmini header, 98 amp GM alternator, Blaster II coil, new master cylinder, duel windshield washer motors, A/C converted to compressor with oilier and intake filter

Drive train
Added power steering, front (22spine) Lock Rite locker (in pig), rear Lock Rite locker (in pig),  front and rear Richmond 5.83:1 gears, new Superwinch locking hubs, new rear break pistons, 1" rear drive shaft spacer, 1/2" CV shaft spacer, 5.12 1 front and 2 rear gear R&P sets, 4 CV shafts, extra axels


Note, looks like the 5.83 gears are not going to work.... 

i am posting this here first cause if someone wants something, or something heavy i will be going to the market meet on july 29 and would not charge shipping if paid in advance.  pm me if there is someting you want, i am a little slow in answering sometimes.

i could use the 583 gears. for my rig. Email me Gboothby@cinci.rr.com

would you sell the whole thing minus what you want?
alsodo you got any pics?

http://rides.webshots.com/album/143507739HNkKPC

sorry nunk, i have the whole thing torn apart already, its just a body and parts.  but here are pics of what it looked like 3 weeks ago.

cincy, i sent you a pm, will send an email too.

thanks for looking.